Due to supply and demand, some barrels may take longer than others to receive. Please email or call us if you would like an estimated time of arrival.
After turning down the barrel, we jacket a 416R Stainless steel match barrel in a roll-wrapped carbon fiber sleeve and load it under tension. We use this jacketing method rather than wrapping the barrel in carbon fiber because this method of wrapping has been proven to trap heat and cause delamination. The carbon fiber we use is specially designed to move at the same expansion rate as 416R stainless steel. We machine slots into the carbon fiber allowing air to move around the barrel and vent heat quicker without any delamination issues. Using the Carbon Fiber this way keeps the rifling straighter the warmer the barrel gets because it's under tension. This allows us to maintain superior stiffness and strength while keeping the barrel extremely lightweight.
- We highly recommend using a Toolcraft bolt with any of our barrels, as this is the bolt we spec to
- Stainless steel beneath carbon is fluted
- 6 Groove Button Rifling
- 1:7.5 or 1:8 Twist
- 5/8" 24 Threads
- .875 OD
- 11° Target Crown
- Chambered in 6mm ARC
- 12" - Carbine Gas
- 14.5"-16" - Mid Gas
- 18"-20" - Rifle Gas
- 22"-24" - Rifle Gas (If your barrel was ordered before 2/10/22 in these lengths, it is a rifle+2 gas length)
- AR-15 Platform